基于ROMS和4DVAR的沿轨与网格化SSH数据同化效果评价

Remote sensing products are significant in the data assimilation of an ocean model. Considering the resolution and space coverage of different remote sensing data, two types of sea surface height(SSH) product are employed in the assimilation, including the gridded products from AVISO and the original along-track observations used in the generation. To explore their impact on the assimilation results, an experiment focus on the South China Sea(SCS) is conducted based on the Regional Ocean Modeling System(ROMS) and the four-dimensional variational data assimilation(4 DVAR) technology. The comparison with EN4 data set and Argo profile indicates that, the along-track SSH assimilation result presents to be more accurate than the gridded SSH assimilation, because some noises may have been introduced in the merging process. Moreover, the mesoscale eddy detection capability of the assimilation results is analyzed by a vector geometry–based algorithm. It is verified that, the assimilation of the gridded SSH shows superiority in describing the eddy's characteristics, since the complete structure of the ocean surface has been reconstructed by the original data merging.     

苏北浅滩沉积物中的大型绿藻微观繁殖体的垂直分布和物种多样性

本研究通过在2017年秋冬季组织实施的2个绿潮种源调查航次,研究苏北浅滩紫菜养殖区沉积物中的大型绿藻微观繁殖体的垂直分布和物种多样性。对沉积物中的微观繁殖体的定量实验结果表明:表层泥样中绿藻微观繁殖体的丰度最高,随着深度的增加迅速降低。在9月份表层沉积物中丰度为9±2ind./g,而在11月份表层丰度达到98±25ind./g;与9月份相比, 11月份浅滩沉积物中绿藻繁殖体数量呈现出显著升高的趋势。通过对51个绿藻样品的分子鉴定发现:沉积物中存在石莼属(Ulva)、尾孢藻属(Urospora)、盘苔属(Blidingia)等大型绿藻的微观繁殖体;数量占优是石莼属繁殖体,主要包括曲浒苔(Ulva flexuosa)、浒苔(Ulva prolifera)、扁浒苔(Ulva compressa)、缘管浒苔(Ulva linza);其中曲浒苔占据的比例最高,在9和11月份分别达到80.94%和73.33%。在2个调查航次中,都从沉积物中发现了绿潮浒苔的微观繁殖体,这些微观繁殖体是绿潮浒苔在苏北浅滩种源维持的重要方式和关键阶段,也构成了黄海浒苔绿潮连年暴发的"种子库"。     

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

紫外-可见分光光度法测定多花黄精多糖含量

目的：测定湖南洪江国家黄精标准化基地多花黄精中的多糖含量，为多花黄精的进一步开发利用及药材质量标准研究奠定基础。方法：以葡萄糖为标准品，采用硫酸-蒽酮试剂显色，应用紫外-可见分光光度法测定多花黄精多糖含量。结果：葡萄糖在3.28～19.68μg/mL范围内线性良好（r=0.9992），多花黄精多糖平均含量为8.05%。结论：洪江种植基地的多花黄精品质优良，洪江是道地黄精药材种植理想基地。     

大别山及其周边现今垂直形变研究

基于1980年、2005年和2015年3期区域精密水准网观测资料，利用线性动态平差模型计算获取大别山地区水准网长期垂直运动速度场图像。研究发现，淮河平原地表下沉较为严重，大别山呈现弱隆升趋势运动，长江谷地边缘地区较大别山区呈现明显的隆升运动。跨郯庐断裂带水准剖面结果显示，垂直运动与地形呈负相关和弱相关。     

路网约束条件下热力规则设计与试验

热力图是一种能直观准确展示空间观测值的有效工具，在多个领域具有广泛应用。本文在分析设定不同道路层权重、道路技术等级分类的基础上，以反距离权重、直方图均衡化、密度补偿、参数多次迭代等方法，研究构建了以热力方式展示道路网分布及发达程度的相关规则体系。热力规则通过道路赋权、路线曲面化、密度协调、图面综合等多套规则的有机结合，实现了道路网总体发达水平信息的提取与展示，并以全球地理信息资源建设项目路网成果中的亚洲和非洲部分国家数据为例，进行了信息提取与热力分布试验。     

资源三号和天绘一号卫星影像无控联合平差精度分析

近年来国产卫星传感器类型日益丰富，使用自主可控的国产卫星影像进行生产和研究的需求越来越大，多源国产卫星影像联合平差的精度分析显得尤为重要。本文针对在立体测图生产中，资源三号卫星影像在时相较旧、噪声较大、云覆盖和摄影漏洞等特殊困难的条件下，利用天绘一号卫星影像进行补漏生产的情况，最终分析并验证了两者无控联合平差的可行性和成果精度。     

基于MODIS数据的湖北省地级以上城市城区地表温度变化分析

基于MODIS数据,以湖北省地级以上城市城区为研究对象,通过对湖北省13个地级以上城市城区边界矢量数据与地表温度因子进行套合处理,采用叠置分析方法对2000、2015、2017年湖北省地级以上城市城区的地表温度进行统计,并分析城镇化建设对城区地表温度产生的影响。     

Influence of Stress on Void Ratios of Compacted Crushed Rock Masses in Coal Mine Gobs

The transfer and evolution of stress among rock blocks directly change the void ratios of crushed rock masses and affect the flow of methane in coal mine gobs. In this study, a Lagrange framework and a discrete element method, along with the soft-sphere model and EDEM numerical software, were used. The compaction processes of rock blocks with diameters of 0.6, 0.8, and 1.0 m were simulated with the degrees of compression set at 0%, 5%, 10%, 15%, 20%, and 25%. This study examines the influence of stress on void ratios of compacted crushed rock masses in coal mine gobs. The results showed that stress was mainly transmitted downward through strong force chains. As the degree of compression increased, the strong force chains extended downward, which resulted in the stress at the upper rock mass to become significantly higher than that at the lower rock mass. It was determined that under different degrees of compression, the rock mass of coal mine gobs could be divided, from the bottom to the top, into a lower insufficient compression zone (ICZ) and an upper sufficient compression zone (SCZ). From bottom to top, the void ratios in the ICZ sharply decreased and those in the SCZ slowly decreased. Void ratios in the ICZ were 1.2–1.7 times higher than those in the SCZ.

     

Analysis of Spatial–Temporal Evolution of Mining-Induced Fracture Field: A Case Study Using Image Processing in the Shaqu Coal Mine,China

Natural Resources Research - Mining-induced fracture plays a key role in gas drainage for gas burst-prone underground coal mines, especially for closely multilayered coal seams. The layout and...